Your Questions
Your Questions
Q: Dr. Eppley, I am interested in chin implant removal. I would like to have my RZ Extended Medpor chin implant (5mm projection) be removed that was implanted about 6 years ago. I’ve had three revision surgeries since then and the implant is still causing intermittent numbness of varying degrees and motor control problems on the right side of the chin due to excessive scaring (according to my surgeon). Cooling and other activities that cause vasoconstriction alleviate the sensory and motor problems whereas anything that causes vasodilation does the opposite. About four years ago a heavy intravenous cortisone regimen that I received for a facial infection almost entirely reversed all my problems. Unfortunately, the numbness and lack of motor control returned within several weeks. Nevertheless, this success with cortisone indicates that my problems could still be reversible after all these years and that in fact scarring could be the main culprit.
I should also note that I never tolerated intraoral incisions well. Each time they caused me at least 1 year of full numbness until sensation would return and I was unable to move my mentalis muscle for the same period of time. It was like glued to my chin. The last revision surgery was done through a submental incision and that didn’t cause any problems.
Do you advise me to have the chin implant removal done?
A: I think the simple answer is…you are never going to have the potential for significant in your symptoms unless you take the risk of doing it. While there are no guarantees in surgery, and every surgery has risks, your over 6 year history of issues since the implant placement strongly suggests that a more defintive solution should be pursued.
Dr. Barry Eppley
Indianpolis, Indiana
Q: Dr. Eppley, I am interested in occipital skull implant augmentation. The back of my head is flat, and I would like to explore the options of surgery. I currently live in Montana. I would like to know what the procedures are for out-of-state patients.? Thanks for your time. I look forward to hearing back from you.
A: All of my skull implant patients are from everywhere around the world so your discrepant geography is the norm for my unique practice. Skull augmentation is done today using a custom skull implant technique made from the patient’s 3D CT scan. This sac is obtained where the patient lives, is sent in and used to make the custom implant online and them manufactured for the surgery. This is a process that takes about a month to complete. The patient then only comes in one time for surgery, arriving the day before and leaving for home within 24 to 36 hours later.
Please send me some pictures of your head from the side view for my assessment for this procedure. From these I will be able to do computer imaging so I can determine how much occipital augmentation you may desire.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in breast implant revision. I currently have saline implants below the muscle. I believe they are around 350 to 400 cc. As you can see in the attached pictures my breasts are asymmetric. They increasingly got worst as the capsulation increased. My goal would be to improve this. I’m not young any more so I don’t expect the 25 year perky breast but if the right one could be freed up from the scar tissue to drop and better match the left, I would not be so embarrassed by them. Or, two new ones that matched and didn’t point down at my toes would work too.
A: Thank you for sending your pictures. You are correct in that you have a right breast implant contracture (Grade III) which is the major source of your breast asymmetry. But you also have a Grade III/IV ptosis. (breast sagging) The ptosis plays a major role in defining your two breast implant revision options.
If you choose to live with the ptosis then you could have a right implant capsulectomy and the implant could be made to drop lower. This would be the simplest and most economical approach but also the least aesthetically pleasing one.
Conversely the complete opposite and more comprehensive approach would be to have full breast lifts done with new implants and the aforementioned capsulectomy. This is the most aesthetic approach but is also the most extensive.
As you can see your breast sagging plays a major role in your breast implant asymmetry correction decision.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in lip implant removal surgery. I would like to consider removal of my Gore-Tex lip implant. It is uneven and also tender. It was implanted around age 30 and I am now 49 years old. I would consider some type of plumping afterward as I suspect it will have a deflated look.
A: You undoubtably have in an old style Gore-tex lip implant that is probably multi strand in design. You or I would have no idea as to his many strands were actually implanted. (although it is almost always more than just one) These can be challenging to remove and you are correct in that some immediate volume restoration would be helpful. Concurrent fat injections with the lip implant removal would be the appropriate approach since it may add some volume. But it also be a good treatment to prevent adverse scarring/contracture that can occur from such lip implant removal procedures.
Today’s lip implants are far easier to remove as they are a single tubular implant that slides back out just as easily as it is implanted An enveloping capsule that does not adhere to the implant enables its much easier removal.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in facial reshaping surgery. I would like your opinion on what I should do to ”enhance” the harmony of my face. I’m referring to what procedures would make my face look better and what’s necessary to be done. I think I need a nose job at least but I’d also like an opinion on what other ”fix-ups” would be necessary because I don’t want to do the wrong thing and make mistakes.
A: Thank you for your facial reshaping surgery inquiry. When it comes to your face the first thing to realize is that you have a very good looking face with strong bone structure. There is no deficiencies or an obvious reshaping effort that needs to be done to normal your facial proportions.
That be said if you want to enhance the existing structure of your face the best thing to do is jaw angle augmentation which will help make your jawline stronger. Other areas like male model cheekbone augmentation is an option besides the rhinoplasty. But they probably carry less importance than that of your jawline for your facial reshaping surgery. Computer imaging will help you see if these facial changes would be aesthetically beneficial.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in facial reshaping surgery. I have attached some pictures of me. Some in fluorescent bathroom light and the others in regular day light from a window. I don’t want to try to “copy” someone’s looks , but I’d rather change my own features in order add as much harmony as possible. I think I would benefit from a nose job. However for the rest of the face things seem more complex and a lot can go wrong. That’s why going to a highly regarded surgeon such as yourself would be the optimal choice for me.
So my problems are that even with a nose job, I’ll still be left with with a face that lacks harmony. My midface is simply way too long. I seem to have a “recessed” maxilla, with little volume leading to a thinner looking face and lack of under eye support (in my case causing the appearance of slightly bulging eyes). Realistically I would like to widen / add more volume to my face. As well as fix my eyes, to give a more upward tired lateral eye shape. I’ve read a lot about different procedures such as infraorbital rim implants, as well as orbital decompression and even just regular fillers. As for the length of the midface, I think that perhaps it could be be made to appear shorter by either a rhinoplasty combined with a lip lift or perhaps extending my chin (which seems a bit recessed) and widening my jaw. I would absolutely like a more prominent/square jaw and chin. So I’m just wondering what options would give me a wider looking face with a more defined jaw/chin as well as under eye support.
I just need a plan or a list of recommend procedures. Something that would give me the best results.
A: Thank you for sending your pictures. Your midface looks long, and there is some component to that perception, but it is mainly because of your other facial features. Your nose is large and protruding and your mouth area is very small. (small lip size and lip width) When you add in some mild chin and infraorbital bony deficiency, this collection of facial features makes the middle part of your face looks too dominant. This would never be approached through a LeFort 1 impaction, besides the negative impact on your upper lip-tooth relationship, because that is simply not the main issue. There are many other facial features that could be changed to put your face into better proportion. They would be the following facial rehabbing surgery procedures in order of importance:
1) Reduction rhinoplasty
2) Chin/Jawline augmentation
3) Upper and lower Lip Advancements with possible mouth widening (I usually do not like to do these two lip changes together)
4) Infraorbital- Malar Augmentation
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I have rib removal scar questions. First one is I saw Pixie Fox who had the rib removal procedure done already. But when I look at her back I see very large scars. So will my scars be similar to hers?? If you can clarify that a lil bit for me. I can make a better decision.
A: As incisional lengths go for rib removal surgery, the scars in Pixie Fox are actually quite good. Assume for the sake of decision that those scars would be similar. I do make them smaller than that today….but the scar decision is an important one and you have to be prepared to live with two scars of some length. It is not a scar free procedure. It is also important to realize that it takes 6 to 12 months for the scars to maximally lose their redness and obvious appearance.
My advice to any patient for any procedure in which a visible scar is a trade-off….you make a decision to do the procedure based on the worst that the scar can look…not on the best you hope the scar may look like. That way one will never be disappointed.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in eye asymmetry surgery. I have problem with my appearance. I have plagiocephaly. In future I’ll want to correct my facial asymmetry using 3D implants, but before it I need to correct my eyes. Now my biggest problem is vertical asymmetry of my eyes, the right eye is higher than the left eye. The left eye is also smaller than the right eye. The left side of my forehead is concave, the right is convex. My eyebrows are asymmetric. Can you help me with my problem? If you need I can send you my 3D CT scan of my head. I have attached my pictures. I’m waiting for your reply.
A: Thank you for sending your facial pictures. What you have is the classic periorbital changes from plagiocephaly. You can not lower the ‘higher’ eye, actually that eye is the correct one. You have to focus on the ‘deformed’ side which is the left lower side. The left eye needs to be raised through orbital floor augmentation, left eyebrow elevation, and left inferior brow bone reduction. This is how I commonly treat this type of orbital or eye asymmetry. This may not create perfect symmetry but it will go a long way in making it better.
I am certain that if you look at the front view of your 3D CT scan you will see the lower left orbital skeletal box.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in jawline liposuction. I posted my concern on Real Self a week ago and you were one of the surgeons that responded. You had said I was not a good candidate for facial contouring due to my prominent cheeks and you did not seem to recommend the liposuction. I wanted to inquire about this further because I had another consultation a few days ago and I was told I would be a good candidate for SmartLipo of the chin and jawline and that they could remove close to 90% of the double chin fat. The Vectra image I am attaching is very general. They told me the imaging does now show shadows very well and the end result would look better than what the Vectra would show. They showed me a few before and after pictures of prior patients and the results were dramatic.
My concern with the procedure is really whether or not I will obtain dramatic results that would justify having the procedure. I am not at my ideal weight but I am currently dieting and exercising to lose 15 pounds. The pictures you see are me at 170 pounds. At 155 pounds, the cheeks do slim down somewhat but the stubborn neck fat still lingers. The double chin is hereditary as my father has it. He is in his early 60’s and it is still very noticeable so that was another reason for me to look into this procedure as I don’t think any of that fat will atrophy any time soon for me.
After doing some more research, I am leaning away from doing any work on the buccal fat pad as I think it’s really the double chin that is making my face look bigger and the buccal lipectomy probably will not give me the result I am really looking for.
My goals are to get a tapered jawline and to reduce the overall size of my face. I’m 5’6″ and I believe my face looks a lot larger than it should on my frame.
I look forward to speaking with you about this.
A: When it comes to contouring any face/jawline with liposuction, its effectiveness is determined by three factors. First what is the natural tissue thickness of the patient’s face. Thicker skinned patients with fuller faces will get some positive changes but it will never be ‘dramatic’. Secondly, how much is the existing fat actually making a contribution to the lack of a defined jawline. In other words, if the fat is reduced will the natural jawline become more apparent or will it just look a ‘little better’. If you don’t have a good jawline bone structure to start with you won’t end up with one even if some fat is removed around it. Thirdly, how does the patient define a ‘dramatic’ result? What constitutes in their mind what a dramatic change in their jawline is.
Applying those three factors to you and your jawline….you have a thick tissued face with an acceptable but not a naturally strong bony jawline. I believe the best jawline result you could possibly get with facial and neck liposuction is what is shown by the Vectra imaging. It will not end up any better than that and that imaging may even be a little optimistic. If that result is what you would describe as ‘dramaric’ and a satisfying result that you will be pleased with the outcome of the procedure. But if you undergo it and expect the outcome to be better with a well defined and visible jawline then you will likely be disappointed. The reality is that your thicker and heavier facial tissues have limits as to how much they can be reduced and show any jawline definition.
This is what I would counsel you on if you were my patient. It is always better in aesthetic surgery to expect the least. What is the minimum type of result you would find acceptable to justify your efforts? Anything result better than the least will then be a bonus and will make for a very satisfying experience.
One final comment….such face and jawline liposuction is all you can do with your face to get some improved definition. There are no other procedures to consider at this point. Just don’t expect it to be a dramatic result with a well defined and sculpted jawline….that is simply not going to happen.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, Is it feasible to do a deep body chemical peel for arms, legs and back? Assuming all could not be done at one time (?) What would be the estimated cost. Everything I’ve read relates to facial peels. I would like to improve the appearance of my skin in these areas with long-term results. Thanks.
A: Skin resurfacing of body areas is completely different than that of the face. While the face has a great blood supply and can heal from even deep laser resurfacing, the rest of the body is not so tolerant. There is no such thing as a deep chemical peel for the body as that would result in delayed healing and terrible scarring. Body skin resurfacing must be approached much more conservatively (light to medium depth peels) and in sections. And even before that is done, skin test areas must be done to determine how the skin will react and heal. Therefore, while body skin rejuvenation can be done by skin resurfacing it must be done more conservatively and in stages unlike that of the face. There is a reason you can’t find much on a body chemical peel procedure…because it is a much more rare procedure than that of facial chemical peels.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am a 32 years old women coming from France. I ‘m interested about the rib removal surgery. Since 5 years ago I am focused on my large waistline. I have tried corset, diet and exercise but no result. I think is because I have a athletic body shape and no much fat in my body. That’s why I come to you to narrow my waist, the only way is the surgery. I would like to know the price of this surgery all inclusive and how long I have to stay before returning in France. As requested you will find my pictures.
1) I have also heard that rib can grow back so it’s reversible it is true?
2) I have a thick skin so would it impact the result of my waist?
Thank you in advance.
A:Thank you for sending your picture. In answer to your questions about rib removal surgery:
1) In an adult removed portions of ribs will NOT grow back. Regrowth of surgically removed ribs is an urban myth.
2) Your thicker skin will not negatively impact the result. I always combine waistline liposuction with rib removal to maximize the result.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in teenage gynecomastia reduction. My 14 year old son has gynecomastia and is very embarrassed about it to the point he doesn’t take of his shirt in public to swim and he wears a tight shirt under his t shirts to hide it. I was not sure if you would perform surgery on him since he is still going through puberty or if insurance would even cover the procedure? Thank you
A: Thank you for sending pictures of your son’s chest. This appears to be a ‘soft’ type of gynecomastia which should respond well to liposuction reduction. His skin and areola will shrink back down with the fibrofatty breast tissue removal.
When it comes to his age, the ‘standard’ thinking it is that this type pf gynecomastia will go away on its own and that he is too young to have surgery. In my experience I find that thinking of early juvenile gynecomastia completely flawed. It will not go away on its own and he is at a critical psychosocial point of development. I would choose to have it treated and reduced now so he can feel a lot better about his chest appearance. Whether it will regrow in the future is unknown but, even if it does, there will still be self-image benefits to having the surgery now.
As for insurance coverage, they would require a complete endocrinological workup to prove there is not a hormonal basis for his gynecomastia (and there is a 99.9% chance there is not) and the gynecomastia would have to be much bigger than his. They would view his problem as cosmetic and deny coverage for it.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I initially consulted a doctor for orthognathic surgery for treating obstructive sleep apnea. He gave me the option to do the orthodontics and straighten the teeth before surgery or just do the surgery and only fix the apnea. The only instruction that he ever gave to my orthodontist is to maximize the overjet. My orthodontist is currently trying to move it into two defined arches as per his plan.
I reached out to you as I have been researching orthognathic surgery and other things related to it. My major concern is appearance and elimination of sleep apnea. Reading around I saw that cheek implants and jaw implants could enhance the appearance and started wondering if that would be something that I could do to have a great aesthetic outcome in addition to the functional improvement. I could certainly use some guidance here.
A: What you need to focus join first are the maxillomandibular advancements for the treatment of your sleep apnea. This will involve moving the underlying bones and it will change your appearance. But implants can not be put in at the same time for a variety of reasons. You need to fix the bone first, see what you look like after and then consider any aesthetic changes that may, if any, be determined to be beneficial. In short you can’t perform orthognathic surgery and facial implant surgery at the same time for functional and aesthetic reasons.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in facial asymmetry surgery. I have been diagnosed with a mild version of hemifacial microsomia. My asymmetry of the face seems to be more a soft tissue involvement. after some CT scan, the bone asymmetry is not as bad. I would like give my face symmetry with either fillers or fat grafting, what would you recommend?
A: Given the two facial asymmetry surgery treatment choices you have provided, you would never use injectable filler unless you just wanted to do a test to see if you like the result. Injectable fillers are temporary and will take a fair volume of them to have any facial augmentative effect. Injectable fat grafting would be the better soft tissue augmentation/reconstructivhe technique since the volume able to be injected is limitless and some of the fat will likely survive and persist.
I would also have to see your 3D CT facial scan to see his significant the underlying bony deficiencies are. Augmentation of any bony deformities, particularly along the jawline, can often be very beneficial and is an assured permanent volume result.
Many congenital facial deformities are often best treated by a combination of hard and soft tissue reconstruction techniques.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in migraine surgery. I have had migraine headaches for years and receive Botox injections for relief. My neurologists injectes them all over my head every four months from which I get good relief. My question is knowing that I get Botox placed all over my head, does that mean I will need surgical decompression of all four nerve zones?
A: Nerve decompression surgery for migraines works by treating the known area(s) of nerve impingement. While Botox has been effective for you, its injection all over the head does not provide a clue as to whether any of the known three migraine nerve sites (supraorbital, zygomaticotemporal and occipital) would be effectively improved by the surgery. In migraine surgery you never just decompress every available nerve site as that may end up doing unnecessary surgery.
There may be some clue as to whether you have specific trigger zone involvement by a description of your migraine pattern. Does it start in one specific area? It is on one side or both sides? Can you put your finger on an area that is most tender or where it seems to come from? Such information would indicate which nerve site(s) should be decompressed.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I have given up my search looking for a surgeon to preform distraction osteogenesis to widen my clavicle. I have heard you preform deltoid implants and have seen it on this website. Is it possible for the implants to add 2 CM of width on each clavicle and does it look natural for the most part? Also I can’t do fat grafting because I am not overweight at all. I just want wider shoulders in width and you seem to know much about this procedure.
Is this procedure becoming more popular, are your patients usually satisfied with the results?
Thank you doctor Eppley for reading this I hope to hear from you soon.
A: You are correct in that no one is going to perform distraction osteogenesis to increase your shoulder width. That is a concept that simply is not going to work for a number of reasons. While deltoid implants are your only option, the question is whether it is a good option.
Deltoid implants are not going to be able to increase your shoulder width by 2 cms or more per side. The skin over the shoulder is simply too tight to tolerate that amount of augmentation. There is also the issue of the incision/scar to place it which is usually done from the posterior axillary skin fold.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in a chin implant revision. I had a chin implant done 15 years ago. The chin implant that was used at the time was too big, roundish and squarish for my heart-shaped face. I needed more chin projection than chin width. The chin implant was also put in crooked, one side was higher then the other. The doctor at the time also put in an additional implant shaped like a matchstick in the depression of my chin and at the bottom of the chin to offset the fact that it was crooked which I was not aware of until after the surgery. Within a week he took out the small implant from the center of the chin which then left a line scar. It was a terrible experience needless to say so I just left the big implant in and the scar until two years ago.
Finally I had the courage to get the chin corrected. I had several different consultations and finally decided on a plastic surgeon that supposedly had expertise in chin implants. We reviewed all the details with many photos and discussions. I finally had the surgery last year. Basically the plastic surgeon decided to use the original implant that I already had in instead of a custom one. He basically just went in and moved the implant downwards and that was it. The result was that it was still too round and big and now way too low. One side had already fallen after one week. The plastic surgeon said I needed a revision and they scheduled it a month later. I again explained to the plastic surgeon prior to the revision that the chin implant was too big and squarish for my heart shaped face. Again we reviewed photos etc…After the surgery the implant was the same. The plastic surgeon had just repositioned the implant slightly higher but it was still wide and squarish and very crooked. I was devastated to say the least.
One month later they scheduled me for another revision. I again voiced my concerns with the plastic surgeon and was assured that he understood what had to be done this time and that the implant had to be carved and shaped to my heart shaped face. After the surgery the implant had finally been reduced in size but was completely carved in a square shape and completely crooked.
Finally I was again scheduled for another revision two months later. Again more photos more discussion etc…The plastic surgeob finally carved the implant smaller and narrower to suit my heart shaped face. However it’s been carved unevenly and positioned off center and there’s a lot of puffiness formed in a wave on the top of the chin and it’s spongy and puffy. It’s a year next month since the last surgery so not sure if this is all scar tissue. I went for a followup last week out of concern with the total result and the plastic surgeon suggested cortisone shots which I did not want to do. I don’t believe that doing a patch up job of cortisone shots or fillers will correct this issue and it’s been very disheartening to think that this is the final result after all these surgeries. I am now considering doing another revision with a custom made chin implant to correct this once and for all. I came upon your profile on RealSelf and went through your website/blog/reviews and feel that you have considerable experience and knowledge in the chin area.
I have attached several photos for you to view and I look forward to speaking with you and thank you for your time in reviewing my situation.
A: Thank you for sending all of your pictures and detailing out your multiple chin surgery history. This is a tragic tale of chin implant augmentation surgery that was both ill-conceived and poorly performed. The fundamental problem, in my opinion, is that you really had the wrong type of chin augmentation surgery. When you have the natural chin anatomy that you have, placing an implant will be hard pressed to create a very satisfying result. Your chin is very horizontally short and subsequently vertically long. Your chin has a 45 to 60 degree angulation backward of the slope of the bone from it normal inclination. Any type of chin implant, particularly one that is placed low on the bone, is going to create vertical elongation and limited horizontal projection. This issue is compounded by the typical narrow width that such a chin shape will have in a female. Any standard chin implant that has wings will end up creating a long and wide chin. (squarish) You have experienced every problematic variation of trying to make a chin implant work in an anatomic situation where it just won’t do well.
With regard to the labiomental scar that is not the approach I would have utilized in your or any situation for the placement/removal of any form of labiomental implant.
Moving forward you have two chin implant revision options. The best option is to convert your chin augmentation to a sliding genioplasty and abandon the implant approach. Your chin needs to come forward and up. (vertically shortened) This is not what a chin implant can do. (as you now know well) The other approach is to make a true custom chin implant BUT shorten the length of the chin bone at the same time so that you still create the important vertical shortening effect.
I am sorry that you have had the outcomes which have occurred and I remain sympathetic about your chin surgery experience.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I had custom facial implants placed about 3 years ago and I am wondering if they may be too big. You can see in one photo that I have some trouble smiling. My cheeks just kind of bunch up. I am considering replacing them and I would appreciate your opinion. They are cheek implants that extend to the paranasal area, chin implant, and jaw implants. Thanks for your time.
A: As I understand by your description you have custom cheek, chin and jaw angle implants. As the old saying goes…beauty is in the eye of the beholder. The fact that you ask the question indicates that you feel the implants are too big. In looking at the pictures you have sent with your initial inquiry, I think there is no question that the chin implant is way too big for your face from an aesthetic standpoint. If your smile feels stiff then the cheek implant size or style may not be quite right for your face also. The question now is whether your current existing implants can be resized or whether you would need new ones. There is also the question for some of them, like the chin implant, as to whether it is needed at all.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in midface shortening. I am interested in the LeFort 1 procedure. However I do not have a gummy smile, so would that be an issue? Perhaps there are better ways to solve the midface ratio by playing around with facial/jaw width. Is there a way to send pictures and get a professional opinion?
A: You are correct in that doing a LeFort I impaction without a gummy smile will have adverse effects on the upper lip-tooth relationship and is not a good idea. Burying the upper teeth under the upper lip has a negative facial effect and creates more of an aging appearance. Searching for other facial options would be what needs to be explored. Please send me some pictures of your face for my assessment and computer imaging of other potential facial reshaping options. Rhinoplasty, midface and/or jaw augmentation and lip enhancements can all be potential facial reshaping procedures that can change the disproportionate appearance of a long or strong middle third of the face.
True midface shortening can only be done through a LeFort 1 impaction as a vertical shortening of a bony vertical maxillary excess.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I consulted with a plastic surgeon in January and he told me that I have an unusually low set zygomatic prominence. He suggested a custom malar implant. From your response I understand that it is indeed reasonable to reconstitute the malar prominence higher up on the face using a custom malar implant approach..
What I want to clarify in particular is what happens to the current zygomatic prominence? As you know it is important to maintain a natural shape to the cheekbones to avoid them looking fake. Assuming that I am not looking for any alteration to the frontal and lateral projection to the zygoma, would two malar prominences not look odd on the face? If it is contended that the custom implant would taper into the former malar prominence, I can envisage this creating an excessively large malar prominence which would run counter to the objective of a sharp, high set malar prominence.
A similar concern arises with respect to the lower border of the zygoma which would ordinarily sit beneath the ‘old’ zygomatic prominence. Can we literally remove this part of the zygoma by burring/shaving in order to raise that border to sit directly under the ‘new’ malar prominence?
A: I can only tell you what I would do…make a custom malar implant that sits high with an anterior infraorbital and posterior arch extension combined with an inferior triangular ostectomy of the lower portion of the zygomatic prominence combined with a buccal lipectomy. This is the most assured approach to maximize the likelihood that an inframalar concavity facial contour is created along with a higher cheekbone appearance.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in bicep implant revision. One of my bicep implants is outside the fascia and the surgeon only sutured it to other tissue as a solution. Can it be re-implanted correctly? My surgery was five months ago. It is too late to fix? What has been your experience with this problem?
A: Whether you can have a successful bicep implant revision depends on the reason your implant currently sits outside of the proper subfascial pocket. If the fascia has not been torn or disrupted, then the implant should be able to be placed into the subfascial position. This would presumably have occurred because the surgeon intentionally placed it above the fascia for whatever reason. This would be favorable for a successful subfascial repositioning. If the implant ended up outside of the pocket because the fascia was torn or disrupted during its initial placement, then repositioning would not likely be successful because surgical repair of the fascia is very difficult due to limited surgical access. This does not mean it is impossible but an intact fascia along the longitudinal axis of the implant location is important to maintain the implant in the pocket.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in Medpor facial implant removals. I had a Medpor chin implant and angle jaw implant done ten years ago. Is there a way to have the implants removed or shaved down to be smaller? I would prefer removing. The jaw implants has two screws and the chin implant one screw. I have read that Medpor is challenging to remove because of potential sagging but suspension can be done. I wear a beard and don’t know if this could be hidden behind beard. Both were done through the mouth not externally. Thank you.
A: Medpor facial implant removals are challenging because of the significant tissue adherence that they have. But they can be successfully removed and I have removed many of them. An important issue with any chin implant removal, particularly when done from inside the mouth, is the risk of chin or lower lip sag thereafter. Even with good muscle suspension this is still a potential issue because what the implant has done is create an overall tissue expansion effect. When you remove the support (chin implant) there is a relative soft tissue excess that may not be overcome by an form of tissue suspension. This depends to some degree on what size the original implant is. But knowing this is a Medpor chin implant, by definition, this is a larger implant with long wings on it. So this issue is probably very relevant to you. This why ideally such implant removals should be supplemented with some residual chin augmentation whether it is a much smaller implant or a small sliding genioplasty subtotal replacement.
Such issues are less pertinent to jaw angle implant removals as they are not anterior projecting structures.
It is best to think of total implant removals, not in situ implant reshaping. This is a recipe for facial asymmetries and implant irregularities.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I was diagnosed with Congestive Heart Failure at 19. I’m now 29. I’ve had 3 defibrillator surgeries, the last one being the 2nd of this month. They implanted a subcutaneous defibrillator which goes in your side and the lead runs under the breast and up in between. It does not have contact with the heart it is like a camera that just watches it. My defibrillator has only ever went off once in 2010, it’s pretty much just a precaution. My ejection fraction is low, like 20%. I’m 90lbs so this particular defibrillator is VERY noticeable and makes me very self conscious. I have like no boobs lol, literally. I’m hoping to possibly get a breast augmentation to make me feel better and make my machine and lead less noticeable. Do you think it’s safe?
A: The two relevant questions are whether breast augmentation is both safe and effective given your medical condition and very thin frame with little body fat. From a safety standpoint this is really a question for your cardiologist and whether he/she would ever give medical clearance for this surgery. The safety of surgery relates to whether you could have general anesthesia which is typically how breast augmentation surgery is done. Another consideration would be to have the surgery under local anesthesia with the breast implants placed above the muscle.
The other question is whether breast implants would provide some camouflage for your debrillator. I have done a few breast augmentations in defibrillator patients and it has been helpful.
Lastly it is important to know where the leads run so they are not damaged during surgery. A chest x-ray is needed before surgery to accurately know their location.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I love the rhinoplasty imaging predictions, they look great! I was wondering however if you could possibly send me a few more. I know I asked for a concave look, but could you show me what it would look like if my nose were made to be a little less concave. Also, what do you think about possibly shortening my nose and nostrils? Would it become too short for my features then? I’m nervous and want to ensure I love the end results, so could you show me a few possibilities for what these two separate end results might look like, one with my nose just a little less concave, and another with my nose a little less concave and shortened.
A: Thank you for your feedback on the rhinoplasty computer imaging. What is important to remember is that computer imaging is just a prediction and and not an exact replica of what can or will be the outcome. It is a good goal and a road map for the surgeon but no one ends up looking exactly like the imaging. It may be close but never exactly like the prediction imaging shows. Rhinoplasty surgery is not ala carte. You can’t dictate the fine details of the change to your nose like getting your coffee at Starbuck’s.
That being said, you should decide to have rhinoplasty surgery based on what you have already seen. If that is enough then the surgery will not disappoint. But if you have to have some change this is more than what is shown then you will find fault with any rhinoplasty surgery and will end up disappointed and always finding fault with some aspect of the result.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am seeking a facial slimming surgery revision. I had cheek bone and jaw angle reduction six months ago in Asia. This seemed to result in cheek bones that dropped, became assymetric and disjointed. As for the jaw bones, the left mandible broke and seems fixed with screws. Could these screws be affecting my nerves and affecting my smile because now when I smile, my smile is crooked. I also have dental maloclusion and cannot chew normally. Please can you look at my CT scans:
1. What has happened to my cheek bones? What needs to be done for corrective surgery?
2. What has happened to my jaw bones? What needs to be done for corrective surgery ?
3. Please give me feedback or input as to what could be causing the problems I am experiencing regarding my crooked smile.
A: Thank you for your inquiry and sending your pictures and x-rays as well as telling your surgical history about cheekbone and jaw angle reduction. In reviewing your CT scans, the answers to your questions and facial slimming surgery revision needs are as follows:
1) The front end of your cheekbone was plated in an inferior (low position) rather than being put back at the correct horizontal level, albeit in a more inward position. I have never seen such a bone positioning of the cheekbone. But this would explain why your cheeks sag.
2) As you had previously stated, you sustained a fracture of the mandibular ramus during the jaw angle reduction procedure. (this also I have never seen before) There are plates sand screws at two levels to fix the fracture. It is possible that the screws from the lower plate could be impinging on the mental nerve which could cause numbness of the lower lip. The fracture could also be as source of bite issues since fixing jaw fractures are a well know source of postoperative malocclusion. (bite is off) Your smile is crooked because your have sustained an injury to the marginal mandibular branch of the facial nerve. This is the nerve that controls the depressor movement of the lower lip. When it does not work the lower lip on he affected side elevates when you smile rather than being pulled down. This is the source of your crooked smile. If the function of this nerve has not returned in one year after the injury, it will not recover.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am very interested in having a chin implant removed while having a genioplasty in its place. However I noticed your article in which you state that the genioplasty can be altered through a midline incision to narrow the bone. Can this midline incision also be used to widen the chin? Therefore augmenting my chin forward with the genioplasty while making it wider with the midline incision?
Thank you
A: A sliding genioplasty can be done where the bone is expanded through a midline sagittal bone cut and the placement of an interpostional bone graft. (allogeneic bone is usually used) This requires more than one metal plate for fixation because of the two independent bone segments (unlike a typical sliding genioplasty which just uses one central plate) but such a widening bony geniplasty can be done. Whether it can achieve the exact effect you are trying to accomplish in the amount of chin width expansion would require computer imaging assessment before surgery. The amount of chin bone expansion by this technique is limited to 1m or less. This would not be enough to replicate what the width of a square chin implant could achieve in most cases.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am looking to receive male model cheek implants. The type of cheeks that I would like to achieve are the high cheekbones that are visible on male models. Now my issue is this: my zygoma is set too low on the face. I believe that this is a particular growth pattern because the same is true about my infraorbital margin. When I trace the infraorbital margin with my hand, it feels too low relative to the position of the centre of my eye.
So my issue is that my zygoma is too low, which has two salient aesthetic consequences: 1) that the malar prominence is too low relative to the rest of the midface, and 2) the lower border of the zygoma is situated too low. My question to you is whether we can manage this issue and replicate a higher zygomatic bone with implants. My thoughts here are that we would: a) reconstitute the malar prominence with the shape of the custom implant, placing it higher on the face. And b) bone reduction/burring of the lower part of the zygoma, thus raising the lower border of the zygoma.
The reason why I believe that this particular part is important is because faces with high set zygomas tend to have a ‘hollowed out’ area that starts where the zygoma stops. Unfortunately the lower part of my zygoma sits too low, meaning that this area is ‘filled out’ in a feminine way rather than the masculine ‘hollowed out’ appearance.
c) My only other question is whether the actual infraorbital margin can be raised as part of an infraorbital extension to the same implant? My thoughts here are that we would both raise and bring the infraorbital margin forward, causing the ‘mew’ margin to sit both higher and more forward relative to the iris.
Thank you for your time, Dr. Eppley
A: I can’t ever say that I have seen anyone whose zygomatic body sits too low with the exception of certain congenital craniofacial deformities. (e.g., Treacher Collins Syndrome) But that comment aside, with custom implant designing you can make infraorbital-malar implants anyway you want. How to achieve the desired external cheek appearance (so called male model cheek implants through such designing, however, remains an art form and not an exact science. Also, It is not rare that such custom infraorbital-malar implants raise the level of the inferior orbital rim.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I lost a fair amount of weight a few years ago after giving birth to twins, and suddenly my superficial temporal artery on the right side of my face started bulging. Now, 5-6 years later, I have another one on my left side. They are bothering me on a daily basis even though I’ve just cut my hair to cover them. I am wondering if anyone has ever experienced permanent hair loss or scalp problems as a result of ligating these arteries? I had a dermatologist tell me once that there was nothing you could do to them without “going bald”, which obviously caused me great concern. But from all that I’ve read in my research, I have never heard of this happening. I really appreciate your response. Many thanks.
A: In my experience with the temporal artery ligation, I have never seen any adverse scalp effects….nor would I expect that to happen. The scalp is a tremendously interconnected vascular system that it would be very difficult, if not impossible, to cut off the blood supply to any one area without long incisions. I do not consider scalp or hair loss a risk with the procedure. But if or really wanted to ‘hedge your bet’ so to speak about the potential hair loss concern, just do ligation on one side at a time.
On a side note, of all the temporal artery ligation patients I have treated they have all been men. I have yet to see a wome
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in cheekbone reconstruction. I had an injury to my right cheekbone 11 years ago it left my face asymmetrical. My right cheekbone is flatter now than the other side. It’s appears to be protruding at one point. The orbital looks out of place. I didn’t have insurance or money at the time to fix it so I allowed it to heal on its own. It obviously healed very poorly. I have not been happy with my appearance ever since. I was wondering what can be done to fix this and achieve a natural symmetry to my face I once had. I fear I may have broken the my zygomatic arch and since I didn’t fix it right away stuck with there results. I have gone to a few surgeons that recommended fillers although my cheekbone it flat in some areas that may help I’m concerned where it appear to protrude will upset that balance. I already have fairly large cheekbones and I don’t want them to appear larger. This is my concern about the filler. Most of the surgeons I went to downplayed the injury and were more interested in convincing me to live with it. This is not an option I’ve tried for 11 years and there hasn’t been a single day that I’ve been overcome by the disappointment in my appearance. This was never the case before the injury. I’m always researching and looking for surgeons that may be able to help. I saw you website and decided to make an inquiry. Thank you.
A: Thank you for sending your pictures. If I understand your concerns using the pictures as a guide, you have three right zygomatico-orbital concerns:
1) Right mid-zygonatic arch depression
2) Right posterior zygomatic bump (may just appear this way because the arch is indented)
3) flatter right inferolateral orbital rim-anterior zygoma
These three areas could be treated by cheekbone reconstruction consisting of the following :
1) small ePTFE zygomatic arch implant (max 3mms thick)
2) rasping down posterior zygomatic bump
3) small hand carved ePTFE inferolateral orbital rim implant
All done from inside the mouth.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in custom orbital rim implants. What is the amount of depth, in mm, that you would consider going for the orbital area as this area, in my opinion, would need more than a few mm? Also if it is a combined orbital rim-submalar this can also include the paranasal area too? I have seen on your blog the custom midface implant and they look great.
Please would you have your secretary send me prices for custom orbital rim only and also for the combined orbital rim-submalar-paranasal implant.
Many thanks,
A: With a custom implant design you can make it cover whatever areas the patient wants or even the entire midface as you have seen in other patient implant design examples.
For the orbital rim area its thickness would vary based on where on the rim it lies. But as a general rule it is thinnest in the tear trough (2-3mms) and thickens as it goes out into the cheek region. (5-6mms)
The actual implant cost of a custom facial implant is the same no matter how it is designed to the surface are it covers. Where the cost varies is in the time it takes to surgically placed. I will have my assistant Camille pass along the cost of the two different options to you tomorrow.
Dr. Barry Eppley
Indianapolis, Indiana