Your Questions
Your Questions
Q: Dr. Eppley, thank you for your presurgical consultation today regarding my rhinoplasty tomorrow. I know we have been over my nose surgery numerous times and you have done a lot of computer imaging for me. I know that no surgery can create perfection but I still need to know if my nasal tip projection will really be shortened by the 2mms that i need. I also need to make sure my nostrils shape will not change in any way. I don’t want to seem pedantic at this point but I am concerned.
A: I would not use the word ‘pedantic’ or even over analytical. Those are patient behavior’s that are common and largely understandable. The concern that I always have with such behaviors is what may lie behind them…unrealistic expectations.
It is important to really understand that surgery is not Photoshop or any other completely predictable method of facial manipulation. Such efforts are important preoperatively but what they really represent is a method of communication as to what the patient’s goals are. Surgeons need goals to try and accomplish what the patient wants. They are, however, not completely accurate representations of what the results may be even though that is the goal. The manipulation of tissues, how they respond in surgery and how they heal afterwards, is not like manipulating images on a computer screen. It is far less predictable and no result will end up perfect or completely symmetric no matter how hard the surgeon tries. Patients who are most satisfied with their plastic surgery have an inherent understanding of realistic and not always predictable outcomes.
As an additional note I must make reference to the type of patient who is at greatest risk of having unrealistic expectations in plastic surgery and one of which I have an enormous experience…the young male patient who is having elective facial surgery. Often times an overanalytical preoperative behavior is a set up for postoperative disappointment…as any result can not withstand the scrutiny and degree of perfection such patients often seeks.
I pass along these thoughts as a note of caution as you are about to proceed into rhinoplasty surgery and hope that your expectations fall in line with what surgery can actually achieve…improvement but never perfection.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I’m seeking your opinion on my chin, neck and jaw. I’m open to all options. My chin is further back than it should be. I would like to know the pros and cons of the sliding genioplasty operation. I would also like to know if the simpler silicone chin implant would give me good results in your professional opinion.
A: Thank you for sending your facial pictures. With a chin deficiency of close to 9 or 10mms, both a chin implant and a sliding genioplasty will offer improvement as assessed in the side view. They probably can’t be differentiated from that viewpoint. But from the fontal and oblique views is where they will be aesthetically different. A sliding genioplasty will usually narrow the chin as it comes forward particularly in the prejowl area. Conversely a chin implant will widen the chin with the increased horizontal projection. In addition a sliding genioplasty can make the chin vertically longer if desired while most chin implants can not. These aesthetic differences in their chin augmentation effects need to be considered for a true 3D chin augmentation surgery.
There is also the consideration of how one feels about an indwelling implant vs using one’s own bone for the surgery. Unlike the logical aspects of their different aesthetic effects this consideration is emotional and personal but may be of no less importance in this decision between the two chin augmentation options.
Lastly, chin augmentation no matter how it is done does not affect the back part of the jaw, only its front part.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am seeking information about the management of a fat grafted breast infection. I came across a question that someone sent to you and your answer to it in regards to infection during fat grafting to breast. Here is the link to it: http://eppleyplasticsurgery.com//why-did-one-of-my-breasts-after-fat-injections-become-infected/. I was wondering if by chance you know what happened to that person and how their issue was solved because I seem to be in an exactly the same situation and wondering what the best and fastest way to fix it. Please let me know if you know how that patient’s case got resolved or if you had a similar one or know of a similar one and what it took to fix it: number of injections to correct, amount of cc-s injected each time and the timing – how long it took between procedures. I really appreciate your help. Thank you.
A: When it comes to treatment of an infection that has occurred in an injected fat graft site, the treatments are oral antibiotics (possibly IV as the breast is a big site with a probably big fat load) and possible needle or small incisional drainage. Having no knowledge of your fat grafted breast infection specifics (what does it look like, how long after the surgery did it occur, how much fat as injected) I could not provide specific recommendations as to your case. But as a general statement such infections should be treated aggressively combining antibiotics and some form of drainage. It is important to realize there is a large amount of dead tissue in there (injected fat with little to no blood supply) so all that can be done should be done right up front. If it is not too ‘severe’ oral antibiotics and needle aspiration may be fine. If it is more ‘severe’, IV antibiotics and incisional drainage may be needed.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I have linked you to an article you wrote in 2015 dealing with injecting fat into the scalp. I was under the impression that by injecting anything (fat) to a tight scalp it would make it more tight. However you state that introducing adipose tissue is actually beneficial for the scalp. Can you elaborate on this? I am interested in a solution to a thin/tight scalp. Thank you.
A: Injected fat is a soft tissue expander/relaxer even if none or only some of the fat survives. It is a simple volumetric principle of stretching the connective tissue between the dermis of the scalp and the underlying galea against the bone. Any fat that survives has to displace/stretch the existing scalp tissues. Any fat that survives pushes the scalp outward and, because it is fat, the scalp will eventually become softer with its survival since it is adding a tissue the that is softer than what most of the scalp is naturally composed.
The key in injecting fat into the scalp is to place it above the galea and right under the skin. This is the easiest tissue plane to enter with a blunt cannula.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am male but my facial appearance lacks masculinity. My eyebrows shape is not straight but arched, the overall vertical extension of the eye area is high, and the forward protrusion of the brow bone is minimal. Could my brow bone be augmented in such a way that the base for the eyebrow moves down, and the eyebrow repositioned downwards and forming a straight line appearance. How close to that could my eyebrows get fixed? Thanks a lot.
A: This is a common question from young men who seek brow bone augmentation. The simple answer to your question is….no. Brow bone augmentation will push the eyebrows forward but not down. No surgical procedure can make your eyebrows go lower…short of a tissue expander placed first in the forehead to create more skin and then a brow bone implant placed. This is because the forehead/brow soft tissues are too tight and the amount of tissue that is available has been ‘made’ based on how the bone has developed. You would have to free up the tissues and create some excess to have the brows be driven further downward. But this would not likely create a straight eyebrow shape from a natural arched one.
Dr. Barry Eppley
Indianapolis, Indiana
Dr. Eppley, I’ve had buccal fat pad removal two year ago and it derounded my fat considerably. I am happy with the results. However, it did no good to my perioral mounds. I came across the your name online while looking for perioral mound liposuction. I wonder how much the procedure costs, its duration and recovery time. I saw three doctors and none of them were familiar with the procedure and they all discourage me to have it done. Note this is a genetic thing, my father and my brother also have it.
A: As you observed by your own experience, buccal lipectomies do not address the perioral mound area. That is a separate subcutaneous fat layer that sits below the encapsulated fat of the buccal space. Perioral mound liposuction is done through small incisions inside the mouth. Other than some swelling there is no real other recovery issues. I would correlate its recovery to that of your prior buccal lipectomy experience. Because it is a small amount of fat removal it will take longer to see the final result than that of a buccal lipectomy, roughly 6 to 8 weeks to see the very final effect on the shape of the face in that area.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, Do you preform breast injections with a Sculptra, or a similar lactic acid polymerized substance. And would you be willing to try a breast injection procedure?
A: Breast augmentation by resorbable synthetic fillers, like Sculptra, is quite frankly a problem waiting to happen. (Sculptra breast injections) Such fillers in significant volumes create soft tissue reactions such as lumps and even granulomas. This creates breast lumps and scar tissue which is the antithesis of what a soft breast should feel like. In addition, creates such soft tissue reactions in a bodily structure in which lifelong cancer surveillance is important is not the best medical decision.. Detecting breast cancer would be made more difficult in such an injected breast and these soft tissue reaction would make breast cancer detection challenging.
In addition, the volume of material needed and the need for repeat injection would make it a very costly endeavor. This cost factor is magnified when one realizes that such injections are not a long-term solution to a sustained increase in breast size.
A safer and more medically sound approach to non-implant breast augmentation than Sculptra breast injections is to use fat injections…provided one has enough fat to do so.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in a repeat full tummy tuck with mesh reinforcement in conjunction with rib removal of the lower 3 ribs. I had a full tummy tuck done a decade ago and at the time the doctor did say that it most likely would need to be repeated with mesh reinforcement given the how well he thought the plication sutures would hold. He was advocating the use of well anchored mesh to supply the long term results that the procedure should provide. I am 5’5” and the lower part of the rib cage does present lower in the torso minimizing any desired hourglass result. At the time the doctor did feel that I would be a good candidate for rib removal if the procedure were to repeated. Since that time this doctor has retired but your name has come up as an expert in these types of surgery.
A: Mesh reinforcement on a repeat tummy tuck can be done. The only question is what type of mesh. There are lots of option but they fundamentally come down to non-resorbable polymer ones vs. slowly resorbable polymer ones that get replaced by considerable scar tissues over several years. Each has their advantages and disadvantages. Rib removal can be done at the same time although that requires small incisions in the back from the prone position. Ribs #10 through # can only be removed from behind. Only the subcostal ribs #7 through #9 can be removed from the tummy tuck approach.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I’ve attached a few photos of my face/jaw. I would describe it as one side of my jaw being longer than the other and where the two halves meet at my chin, there’s a sort of deviation to one side. I’m curious what kind of effect an implant placed over my jaw/chin could achieve.
A: Thank you for sending your pictures. You do have a jawline asymmetry and the deviation of the chin reflects how one side is different than the other. Such jawline asymmetries would traditionally be difficult to make a lot better because ‘spot’ reduction or augmentations along the jawline by just using he surgeon’s eye/judgment often ends up magnifying the problem rather than improving it. A better approach for jawline asymmetries that are not going to be managed by orhognathic surgery is a custom jawline implant. A custom jawline offers the best approach because it creates an outer zone of augmentation that is symmetric on both sides (and straightens the chin) and then it just matches the asymmetric jawline bone underneath it. Thus it is based on creating an outer jawline symmetry first (as well as whatever jawline augmentation the patient desires) and then makes it match its underlying asymmetric bone.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, One week ago I had an otoplasty done and my earlobes protrude quite a bit. My surgeon has declined a revision as he states it can”t be fixed due to there being no cartilage in the earlobe. I would like to hear from Doctor Eppley who has experience surgically setting back earlobes as part of otoplasty according to Real Self. what specific procedure do you use and what is your % success rate with earlobes to avoid telephone ear deformity? Also, how soon can the earlobe be revised after my otoplasty?
A: When doing an otoplasty it is important to consider the position of the earlobe when the cartilage manipulations are done. (cartilaginous otoplasty) If the earlobe now sticks out beyond the lateral projection of the repositioned helical rim then it needs to be setback as well at the same time. (earlobe reshaping otoplasty) This is done by a fishtail skin excision on the back of the earlobes. (soft tissue otoplasty) This then creates a complete otoplasty. It is well known that the earlobe does not contain cartilage but that has no impact one whether it can be repositioned.
As a secondary procedure an earlobe reshaping setback can be done and it really could be done at any time after the original otoplasty procedure.
FYI a telephone ear deformity is when the cartilage of the ear is pulled back too far. (the helical rim sits back further than the antihelical rim, it has nothing to do with the earlobe.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I appreciate that you take the time to educate the public on plastic surgery, and I want to thank you for that. I’m planning on going to you this summer for temporal width reduction, cheekbone reduction, and chin/jaw reduction as my face is wide.
I had an intraoral chin reduction which I immediately regretted from a less experienced surgeon. He did a sliding genioplasty to move the chin backwards to reduce the horizontal projection, and also did some intraoral burring on the sides to reduce the width. The end result is that I still had a very wide chin. It was a bit less square, but still very wide. I was also left with drooping under my chin.
I had a revision with another surgeon in December in which he did a submental tuck-up which seems to have fixed the droopy chin problem, and he also did submental burring to reduce the width. It did reduce the width, but not as much as I would have liked.
I just want a more feminine, tapered lower face but my chin still looks a bit wide and full. I asked you in a previous question about if an intraoral wedge narrowing approach would produced a more significant narrowing effect than a submental approach, and you said it shouldn’t matter. So I’m wondering:
1) For chin narrowing, are burring-only approaches not as effective as tubercle ostectomy approaches?
2) What is the ultimate limitation of how much the chin can be narrowed? Is it because of the mental nerve? Since the mental nerve is located on either side, could an intraoral wedge reduction approach allow for more width reduction because it’s between the mental nerves?
Thank you so much!
A: In answer to your chin reduction questions:
1) In reality the submental shaving reduction technique is the most effective technique as it provides the best visual access and can take the bone removal back far along the jawline. The intraoral wedge reduction technique is more limited because it is a superior approach that is limited by the location of the mental nerves.
2) Chin reduction reshaping is done below the level of the mental nerve so there is no restriction in the amount of bone reduction that can be done. The limits are what the soft tissue can allow without resulting in ptosis or sagging.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I had a few quick questions concerning chin surgery, or more specifically sliding genioplasty.
1) Is 18 years old to young to consider such a procedure? (my pediatrician expects me to continue growing until 22)
2) I had read that some surgeons remove the hardware once the two bones fuse together usually around 9-12 months post-op. What’s your take on this?
3) I was hoping to stay away from implants due to possible bone erosion. Do you perform procedures where you cut the lower chin into two or three parts, in order to widen the chin? (I believe some people call it an Expanding Genioplasty)
4) Chin surgery usually gets lumped with chin implants on Real Self showing an average price of around $5,000. Without diving to much into financing, would it make sense to expect an average price of $10-12k for a Sliding Genioplasty, and perhaps even more for one that attempts to widen the chin?
The goal would be to masculinize the chin by advancing it in all 3 directions. Sorry for all the questions and thank you for your advice!
A: In answer to your sliding genioplasty questions:
- 18 years of age is not too young for a sliding genioplasty chin augmentation procedure.
- There is no reason to remove the hardware later, I have never done it.
- While your concept of chin implant and ‘bone erosion’ is erroneous, you are referring to a widening bony geniplasty with a midline split of the down fractured segment and the placement of an interpoitional graft. Like a narrowing any genioplasty where a central segment of bone is removed, the central slit can be grafted to widen the chin as well.
- I will have my assistant pass along the actual cost of the surgery to you next week.
Dr. Barry Eppley
Indianapols, Indiana
Q: Dr. Eppley, Orthognathic surgery is a more dangerous and time-consuming surgery than jawline augmentation and if it’s possible to have an ideal aesthetic jaw without going through the more complicated surgery, that would be nice. I do have an overbite but I was under the impression (although this may be wrong) that it could be corrected/compensated for with just braces/invisalign attachments and bands without surgery. I’ve never had any pain or other functional issues from my jaw alignment, so it’s mostly an aesthetic worry.
If orthognathic surgery is the only way to get an ideal jawline and chin with my current bone structure, (and perhaps getting implants afterwards) then I’ll do it, otherwise getting just a wraparound jawline implant would be ideal. I’ve looked at before/after pictures of jawline and chin implants and it seems as though there’s a limit for how much projection can be added, and I’d also like a natural look.
Is there any way I could get a consult with my pictures to see what my projected outcome would be with just jawline implants? Are jawline implants never recommended if there’s any overbite?
Thank you.
A: You have thus answered the question about the need for orthognathic surgery…it is not for you as your primary problem is the aesthetics of the jawline and not its function. That is good because orthognathic surgery in most cases can not approximate what a custom jawline implant can do.
You are, however, inaccurate about the limits of a custom jawline implants. The aesthetic risk with their use is far and away that they can easily be created too big rather than being too small.
I would need to see your facial pictures as well as have an idea as to what your jawline goals are to answer the question of whether a custom jawline implant would be aesthetically effective for you.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I’m an out of town patient looking to surgically enhance my jawline. I’m not sure if a wraparound custom jawline implant or even a genioplasty would be enough to have an aesthetic jawline and chin or if I should be pursuing a bilateral sagittal split ramps osteotomy (BSSO) or other orthognathic surgery. Is there any way I could see an approximation of what my jawline would look like with these augmentations and/or get a professional opinion?
A: The answer to your question about orthognathic surgery vs. jawline bone augmentation is fairly simple…orthognathic surgery is only indicated when you have a malocclusion. If you don’t a bite issue that needs to be corrected then only jawline augmentation will work to achieve it. The most effective form of jawline augmentation, if it is more than just a chin issue, is a custom jawline implant. In general orthognathic surgery and custom jawline implants are not equivalent procedures, they have different jawline effects. But orthognathic surgery should never be considered a jawline enhancement procedure even if it can create some greater chin prominence. But it certainly does not improve the shape or size of the jaw angles.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I had custom jawline and cheek implants placed about five weeks ago. I have noticed some asymmetry of my cheeks and chin although my doctor said the implants are positioned perfectly. How soon would you recommend to revise it and how can I tell the exact location of the implants? I am wondering if the asymmetry of the chin is due to the lack of any screws used to secure it.
A: In answer to your custom jawline and cheek implant questions:
1) First and foremost every patient needs to wait until three months after the original surgery before ever doing a revision. It takes a full three months for all the tissues to settle and you want to give the tissues to to recover. Too early intervention may result in an incision that does not heal so well the next time.
2) If you want to know the precise location of your implants, and not guess about it, get a 3D CT scan. That will end all the speculation about it. It will provide unequivocal visual assessment of their placement.
3) As for your chin I usually place two screws to prevent rotation. But I defer to #2 above which will answer the implant positioning questions, screw location etc.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I have been considering facelift surgery for two years. I have done extensive research and have had consultations with local doctors. While I think I need both a mini facelift and neck lift, I am very uncomfortable/scared to do both at one time. I am a 57 year old female and honestly believe that I look 65 due to a lifetime of sun exposure. My thought of starting with a neck lift is that it will give me an introduction to facial surgery and help to relieve my angst of cosmetic surgery. I would love to have your thoughts. (is the neck lift the right procedure for me)? Thank you.
A: I believe you are confusing several ‘facelift’ terms and procedures. Technically a traditional facelift affects the lower face and neck and is best known as a jowl-neck lift. (this is what you are calling a ‘necklift’) This is the foundational procedure in the treatment of facial aging/facial sagging and is absolutely what you should do as the first and most basic procedure. This will help immensely by cleaning up the neck sagging as well as the jowls along the jawline.
FYI a minifacelift is a watered down limited form of a lower facelift that is not appropriate for you. It is indicated for younger patients with more limited facial aging issues or as a secondary procedure years after a primary facelift
Because you also have some midface sag (and central facial hollowing/gauntness) I believe term you are referring to is a midface lift…not a mini facelift. You have multiple options here as this requires some additional work from that of the lower facelift. You could defer it to later you or you could treat it at the same time with either a midface lift or more simple malar-submalar implants. (which create the same effect as a more extended midface lift) The timing and technique to treat it can be debated and each approach and technique as their own advantages and disadvantages.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am 21 years old and have a very low-riding scrotum. I am wondering if you have operated on someone my age before and if you are able to perform a scrotal reduction procedure. Also why do you think that my scrotum hangs so low, could it be a sign of a connective tissue disorder? Thank you.
A: Thank you for your inquiry. Scrotal reductions are typically done in older men who develop sagging due to age and gravity and in some younger patients who can develop a scrotal sag after large amounts of weight loss. While these are the typical patients that have scrotal reduction, the surgery can be performed on any patient regardless of age that has a scrotal sag and desires a scrotal lift. While I can not answer the question why your scrotum hangs so low, it is unlikely it would be a connective tissue disorder as this would affect other bodily areas as well and not be just isolated to the scrotum only. Most likely it is just your natural anatomy and does not represent a deformity other than its aesthetic appearance. But a scrotal lift can be successfully performed on a a very young male.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in brow bone augmentation. Last year I had a hairline lowering procedure. Apart from some minor shock loss, the surgery went well. I had planned to have additional hair transplants to round out my hairline in the next six months. But I have been researching brow bone augmentation and it appears that the incision is usually near the hairline. I would like to consult with you about the feasibility of a 5mm brow bone augmentation. My ideal augmentation would add 5mm projection at the outer corners of my eyebrows and gradually slope towards 0mm projection as it approaches the center of the brow bone. Complicating all this is some asymmetry–my right eyebrow is higher than the left, and the eyelid on that side is more prominent, although I cannot tell if this asymmetry is due to the underlying bone.
If I am a candidate for augmentation, it appears to me that it would be optimal to have the augmentation first, and the transplants second, in order to conceal the scar. Would love to hear your thoughts on this.
A: Thank you for your inquiry and sending your pictures. You are precisely correct in that if your were to do brow augmentation it should be done before the hair transplants as the hairline incision would be used for access to the brows. For the sake of shape precision and with the underlying brow asymmetry, the best approach would be a custom brow bone implant made from a 3D CT scan. That is the best method to ensure the desired implant dimensions.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in skull augmentation surgery with an implant. I don’t know if I may need a scalp expansion first or not. I think a little less skull augmentationresult will be OK for me. How is a scalp expansion done by the way?
Would you tell me about how the procedure is done? Where will the incision be and how big will it be? Are there any possibility that I will get loose hair where the scar is made? Are there any possible complications with his surgery? How will the recovery be?
Thank you again.
A: A scalp expansion is done by the placement of a scalp tissue expander under the scalp. It is then slowly inflated over 6 weeks in preparation for the second stage placement of the skull augmentation implant.
A scalp incision of about 9 cms is made across the top of the head near the crown area to make the pocket and place the implant. The incision nor the underlying implant will affect hair growth. There will be a resultant fine line scar but it heals very well and usually is barely detectable.
Like any other implants the body there is always the risk of infection, but the good blood supply of the scalp and skull bone makes it a very low risk. Having done hundreds of skull implants. I have yet to see an infection. (this does not make it impossible however)
Recovery is usually much quicker than one would think since it is just an implant in top of the head. There are no after surgery restrictions. Most of the swelling is gone in 10 to 4 days after surgery.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I saw you on Real Self answer questions regarding to cheekbone reduction complication treatments.
I had my cheekbone reduced and very unhappy with the results. If i was to attempt to reposition the cheekbones to the original anatomical position would that require a coronal incision across the scalp? Or is there a less invasive method? If i choose to bypss all that and choose cheek implants, would that help with midface sag or do i still need a coronal incision to lift the muscles back up? or would a SMAS facelift suffice? Thank you.
A: Thank you for your inquiry. Reversal of cheekbone reduction osteotomies are done the same way the original operation was performed…which I assume intraorally for the anterior cheek osteotomy and a small preauricular skin incision for the posterior arch osteotomy. (which is how I do them) I would need to see x-rays, however, to see how yours were done. But most certainly you would never do a coronal approach to reverse it from above. (While effective it would not be worth the tradeoff of that operation for it)
Alternative approaches are to use an implant to create some soft tissue cheek lift. A facelift helps with any sag along the jawline but less so of the cheeks.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in multiple facial reshaping surgeries for my nose, cheeks and jawline. I have attached my pictures with morphs of what I want to achieve. I want to see off these type of results are possible.
A: Thank you for sending your picture and providing a detailed description of your facial reshaping goals. To summarize that list it includes the following: rhinoplasty, cheek and jaw angle implants and chin reshaping. The rhinoplasty is straightforward as you seek a more swooped or concave dorsal profile and a more refined and upturned tip. Your jaw angles need a little more definition as it is yet to be determined whether that is primarily a width or vertical lengthening cap implant but either way such implants would come from preformed standard styles and sizes. The cheek augmentation, as defined by the outcome you have drawn, does not come in any preformed style that fits that exact shape. But it is a design that goes back along the arch from the main body of the cheek and I have some special design styles that would work. You appear to want the chin vertically reduced but I not clear about the other shape change. (narrowing?)
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I would like to know how to get information about secondary rhinoplasty with Dr Eppley. I have seen some approaches to correct upturned noses, and I am interested in knowing the options Dr Eppley offers.
A: Thank you for sending your pictures, x-rays and a very detailed description of your surgical history particularly as it relates to your prior rhinoplasty. Your prior nasal concern, and the most difficult challenge to correct, is that of the over rotated nasal tip. There are two fundamental approaches to driving down the tip of the nose, 1) stack caritlage grafts on the infralobular side of the tip while reducing tip length (push the tip skin down using the existing nasal cartilage as the floor) or 2) place an interpositional graft between the septum and the nasal tip to push it down from behind it. Each approach has its merits but with either technique the key is having good cartilage with enough rigidity to create the effect. I will assume that your septal cartilage has been harvested for the original rhinoplasty as well as having one ear harvested as well. This limits your cartilage donor options to either rib cartilage or cadaveric cartilage.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I’d like to get an injected skull implant revision, but I have a few concerns/questions.
1) You mentioned removing and replacing the implant as being the preferred method. What size scalp incision would that take? What material would you use to replace it?
2) You recommended not doing the burring only. Is it because of the potential unfavorable results or is it another reason? How long would that incision be?
I’m nervous to go under the knife again after the results of the last skull implant procedure. My main concern is the resulting scar length and width.
Thanks
A: While I don’t recall what the material that was injected (t would be very helpful to see the operative note from that procedure), I assume it was bone cement or PMMA. The ability to give it a better contour by contouring what is already there is nil. That is why it is better to remove and replace it by:
1) 3 cms scalp incision over it. Such scalp scars heal really well with minimal width. The aesthetic result of such scalp scars is all about how they made and then closed with protection of the hair follcicles.
2) Probably replace with new bone cement because it can be better contoured under direct vision. But this would depend on the size of the defect of which is not known to me yet.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested ins time head augmentation. I have a generally small head and wonder if it is possible to add some volume to the skull to make it a bit higher and wider. Have you performed this kind of surgery before? How is it done? Are there any possible complications or dangers with this surgery?
A: Thank you for sending your pictures and the morphed head shape images. What they show is a crown and side of the head augmentation effect. A custom skull implant can certainly be designed to achieve that type of head shape change. This is not the question. The only question is whether your scalp will stretch enough in a single procedure to accommodate such an implant. The amount of augmentation you seek is right on the edge of whether your scalp will allow for the implant to be placed and a competent scalp closure achieved over it. Generally thin Caucasian females have the least amount of scalp flexibility due to its thinness. In other words do you need a first stage scalp expansion or not? If you can accept a little less of a result then you would not.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I have concerns about chin implant bone erosion. I have noticed the bone holding my lower teeth appear to be eroding somewhat from an overlying Gortex chin implant. Can you remove it and put something in the correct place that will not erode bone.
A: I would like to see the x-rays from which you have determined the occurrence of any bone erosion from an overlying chin implant. What sort of symptoms are you experiencing from it? Almost all chin implants will develop some natural passive settling into the bone which is often interpreted as ‘chin implant bone erosion’. That phenomenon becomes most apparent when the chin implants sits high, above the thicker basal bone of the chin and on the thinner alveolar bone closer to the tooth roots. But this is not a true progressive active inflammatory condition.
That being said it is clear that you also have does aesthetic concerns about the location of the chin implant and maybe even its outward aesthetic augmentation effects. The existing implant can be removed and a new chin implant placed lower over the basal bone. But all types of chin implant materials (silicone, Medpor, Goretex and Mersilene) can develop this passive bone remodeling effect. I have seen it radiographically as well as clinically during chin implant replacements and adjustments.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I need a question answered about facial fat atrophy prevention. I am 29 years old and have been using tretinoin cream (0.05%) every evening and sunscreen with SPF 30 (Mexoryl) every morning since the age of 20.
Therefore my skin has visually not aged since I was 20 years old and looks even better, firmer and tighter.I would also like to prevent the age-related loss of facial fatty tissue. As a sunscreen from inside, I also eat 2 tablespoons of tomato paste together with olive oil every day, because lycopene is a powerful antioxidant. Now I have read that lycopene also accumulates very strongly in the fatty tissue.
Could lycopene prevent or slow down the age-related loss of facial fatty tissue, because of its antioxidant effect? Could it also protect the connective tissue of the deeper tissue layers of the face? What do you think? Thanks in advance for your reply!
A: I think there is no scientific evidence that taking or consuming lycopene is a useful compound for facial fat atrophy prevention. Such an approach is a theoretical one but no clinical or animal trial has ever proven it. But there is n harm in its ingestion so I would continue to make it as it appears to make you feel more comfortable in doing so.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, My questions are concerning what skull reshaping procedures could be combined under a single operation. My skull deformity isn’t localized, the result of untreated craniosynostosis. I have the typical trigonocephalic skull, which is narrow in the front, and wide and tall in the back.
I believe that for an augmentation covering such a large area of the forehead, a preformed silastic implant is preferable.
1. Can a silastic implant be combined with burring of the forehead? How does that affect the printing of the implant, since you’re modifying the bony contours the implant is based on?
2. Can the posterior temporalis muscle be resected in the same operation?
3. Can the saggital ridge be burred down a couple millimeters in the same operation?
4. Would it make more sense to make a number of smaller incisions versus a large coronal incision when combining procedures?
The contours of my skull cause great psychological distress, so I have no particular concern for scarring.
Thank you.
A: Thank you for your inquiry. In answer to your questions:
1) Skull implants combined with skull bone reductions are common. The bone reductions are factored into the implant design process.
2) The posterior temporals muscle can be removed in the same operation as #1.
3) The sagittal ridge can be burred at the sam time as #1 and #2.
4) If the hair density and hairline permit, it is always ideal to use a coronal incision. But I regularly seek how to limit the scalp incision as much as possible in skull reshaping surgery. I can certainly envision for #1 to #3 above that a complete coronal incision would not be needed.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I’m interested in your custom jawline wraparound insert, largely for the sake of vertical facial lengthening but have a few questions. First, what is the maximum vertical height that can be added through these implants, would anything in the 15-18mm range be completely out of the question? What is the recovery time for this procedure, generally?
A: In theory a jawline implant that provides vertical lengthening (inferior border elongation) can be designed to any length. But the limiting factor is the ability for the soft tissue of the chin to stretch down and the masseter muscle in the back to similarly do so without disruption of the masseteric sling. As a general rule 10mms or so is what these tissues will usually tolerate for alloplastic vertical facial lengthening.
Recovery from a custom jawline implant is largely about swelling and it takes a good 2 to 3 weeks for a significant part of the swelling to go down to look more ‘normal’. Although a full resolution of the swelling and a completely normal appearance to occur will take a full six weeks after surgery. Tyoucally the complete resolution of the facial swelling takes much longer than most patients think.
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I was diagnosed Linear Scleroderma at the age of 7 years old. Due to this disease it has created a bald spot that I am able to cover with my hair on the top on my head. This bald spot is about two inches wide and five inches long. I also have a dent on the left side of my forehead. This is something that I have always wanted taken care of and just to look and feel normal. I am able to come to a face to face consultation or I can do a virtual one as well.
A: Thank you for sending your pictures. You have a classic case of linear scleroderma that involves the first division of the trigeminal nerve. Thus its effects go from the eyebrow straight up in the scalp along the pathway of the nerve involving atrophy of bone and soft tissue.. I would treat your case with a two-stage approach that includes the following:
1st Stage = Placement of two scalp tissue expanders on each side of the wide scalp scar with fat injection grafting to the foreheads/brow.
2nd Stage (6 weeks later) – Removal of tissue expanders with excision of scalp scar and advancement of hair-bearing scalp flaps to cover it and placement of custom forehead-brow bone implant
Dr. Barry Eppley
Indianapolis, Indiana
Q: Dr. Eppley, I am interested in eye asymmetry surgery. I was born with congenital torticollis. The torticollis was not caught early and resulted in me sleeping exclusively on my tummy with the left side of my head smushed against the mattress as a newborn/infant which resulted in the asymmetry in my face. My head/neck as a baby would not turn to the left due to the torticollis. I had a plastic surgery consult when I was 12 and we decided to correct the torticollis (by releasing my left side sternoclatomastoid muscle) but the other facial reconstruction freaked me out too much. At that time, it involved significant intracranial work and taking bone from my ribs and raising eyeball …in short it was overwhelming to a 12 year old so I told my parents I didn’t want to do it.
I now feel that with age my right side has become too bulky and my left side seems to be sinking in more which is causing the eye asymmetry to be more noticable. When I was younger, you didn’t notice as much, as the baby fat was more evenly distributed in my face.
When I saw your case study with the Hydroxyapatite cement, it gave me hope that there might be a less invasive fix to even out my eyes?
A: Thank you for sending your pictures and detailing your history. The treatment of eye asymmetry or vertical orbital dystopia (VOD) that has a 5mm or less discrepancy can be done through orbital floor/rim augmentation as well as some surrounding ancillary procedures of the eyelid, cheek and brow bone. (eye asymmetry surgery) A 3D CT scan is very useful in determining the vertical discrepancy and how much orbital floor augmentation would be needed and/or can be done. In many cases of VOD my preferred method is a custom designed implant that covers the orbital floor crosses over the infraorbital rim and onto the cheek…all orbitofacial skeletal areas that are deficient in all cases of VOD.
Dr. Barry Eppley
Indianapolis, Indiana